Icom IC-7700 - Manual (Page 210)

16-9
o The screen as at left is displayed.
• The following dialog appears in the IC-7700 display.
R WARNING!: NEVER turn the IC-7700 power
OFF at this stage.
The transceiver firmware will be corrupted.
!0 Click [OK] to finish the firmware update.
• The “FIRMWARE UPDATING” dialog as above disap-
pears.
!1 Push to turn the IC-7700 power OFF, then
ON again.
!2 Depending on the update, one or two dialog boxes
as at left appear on the IC-7700 display in se-
quence.
R WARNING!: NEVER turn the IC-7700 power
OFF at this stage.
The transceiver firmware will be corrupted.
!3 After the dialog disappears, the firmware update is
completed and normal operation screen appears.
POWER
Please wait for 10sec.
WARNING! NEVER turn power OFF.
Please wait for 25sec.
WARNING! NEVER turn power OFF.
TRX-DSP UPDATING... SCOPE-DSP UPDATING...
Firmware up dating for the main CPU is completed.
The sub CPU and/or DSP firmware update will start automatically depending on the updated contents,
and this will take approx. 2 minutes.
Turn the IC-7700 power OFF, then ON again with [POWER] switch.
After turning the power ON, the IC-7700 will work with the updated firmware.
DO NOT turn the IC-7700 power OFF until the normal operational screen appears.
Click [OK] to finish the firmware update.
i7700
HF/50MHz TRANSCEIVER
IC-R9500 IP Address IC-7700 IP Address
Firmware File Name
Version 1.00
(C) 2007 Icom Inc.
Firmware File Name
Connecting to the IC-7700.
Connected to the IC-7700.
Transfer in progress...
Transfer successful.
Start update.
Please wait a while.
IC-7700 Firm Utility
16
UPDATING THE FIRMWARE