Icom IC-7700 - Manual (Page 174)

12-21
12
SET MODE
D D Load option set mode
Selects file load condition from All and Select.
(default: Select) • All : Loads and sets the all following contents.
• Select : Loads and sets the selected contents only.
Load Contents Select
Selects the antenna memory setting loading condition
YES and NO. (default: NO). • YES : Loads and sets the antenna memory.
• NO : Use the original antenna memory setting.
ANT Memory NO
Selects the reference signal setting load condition
YES and NO. (default: NO). • YES : Loads and sets the reference signal setting.
• NO : Use the original reference signal setting.
REF IN/OUT, REF Adjust NO
Selects the IP address and subnet mask setting load
condition YES and NO. (default: NO). • YES : Loads and sets the IP address and subnet
mask setting.
• NO : Use the original IP address and subnet
mask setting.
IP Address, Subnet Mask NO
Selects the CI-V address setting load condition YES
and NO. (default: NO). • YES : Loads and sets the CI-V address setting.
• NO : Use the original CI-V address setting.
CI–V Address NO
Selects memory channel contents and other settings
load condition YES and NO. (default: YES). • YES : Loads and sets memory channel contents
and other settings.
• NO : Use the original memory channel contents
and other settings.
Other Memory & Settings YES
Selects the voice TX message load condition YES
and NO. (default: YES). • YES : Loads and sets voice TX message.
• NO : Use the original voice TX message.
Voice TX Memory YES
Selects the voice RX message load condition YES
and NO. (default: NO). • YES : Loads and sets voice RX message.
• NO : Use the original voice RX message.
Voice RX Memory YES