Icom IC-7700 - Manual (Page 176)

12-23
12
SET MODE
■
File loading
By loading the saved setting file from the USB-Mem-
ory, you can easily set up another IC-7700—several
operators settings can easily be applied to one IC-
7700.
q During set mode menu screen indication, push
[F-7•USB] to select USB set menu screen.
w Push [F-1•LOAD] to select setting load screen.
• The indicator above the USB connectors and “USB” in-
dicator on the display blink.
• After the USB-Memory contents are displayed, the indi-
cators stop blinking.
e Push [F-5•OPTION] to select load option set mode,
then set the desired loading conditions, if desired.
• See page 12-21 for details.
r Push [F-2• Y ] or [F-3• Z ] to select the desired set-
ting file.
t Push [F-4•LOAD].
• Confirmation screen appears.
y Push [F-6•OK] to starts loading.
• After the loading is completed, the message dialog, “Re-
boot the IC-7700,” appears.
u Turn the transceiver power OFF then ON to make
the setting effective.
DIR/FILE
F-1
F-7
WIDE CANCEL
F-5
OPTION
F-6
SORT OK
F-4
LOAD
/ /
F-2
∫
F-3
√ EXIT/SET