Icom IC-7700 User Manual
Page 141
9-7
■
Setting select memory channels
D
D
Setting in scan screen
q
Push
several times to close a multi-func-
tion screen, if necessary.
w
Select memory mode.
e
Push [F-5•SCAN] to select the scan screen.
r
Select the desired memory channel to set as a se-
lect memory channel.
•
/
keys and direct keypad selections can be
used.
t
Push [F-3•SELECT] several times to set the mem-
ory channel as a select memory
★
1,
★
2,
★
3 or not.
y
Repeat steps
r
to
t
to program another memory
channel as a select memory channel.
u
Push
to exit the scan screen.
D
D
Setting in memory list screen
q
Push
several times to close a multi-func-
tion screen, if necessary.
w
Push [F-4•MEMORY] to select memory list screen.
e
Rotate the main dial while pushing [F-1•ROLL] or
[F-2•SET] to select the desired memory channel.
•
/
keys and direct keypad selections can be
used.
r
Push [F-3•SELECT] several times to set the mem-
ory channel as a select memory
★
1,
★
2,
★
3 or not.
t
Repeat steps
e
to
r
to program another memory
channel as a select memory channel.
y
Push
to exit the memory list screen.
D
D
Erasing the select scan setting
q
Push
several times to close a multi-func-
tion screen, if necessary.
w
Push [F-4•MEMORY] to select memory list screen,
or push [F-5•SCAN] to select scan screen.
e
Push and hold [F-3•SELECT] for 1 sec. to display
memory select all clear window.
r
Push one of the following keys to clear all select
scan setting.
[F-1•
★
1]
: Clears all
★
1 setting.
[F-2•
★
2]
: Clears all
★
2 setting.
[F-3•
★
3]
: Clears all
★
3 setting.
[F-4•
★
1,2,3] : Clears all select setting.
t
Push
to exit the memory list screen.
EXIT/SET
EXIT/SET
EXIT/SET
√
∫
EXIT/SET
EXIT/SET
√
∫
EXIT/SET
9
SCANS