Icom IC-7700 - Manual (Page 195)

D D Command table (continued)
14-8
14
CONTROL COMMAND
1A 050176 Send/read antenna selection for
45.00 to 60.00 MHz band
(see p. 14-10 for details)
050177 Send/read antenna temporary
memory set (0=OFF, 1=ON)
050178 Send/read antenna selection
(0=OFF, 1=Manual, 2=Auto)
050179 Send/read usage for ANT2
(0=OFF, 1=TX/RX)
050180 Send/read usage for ANT3
(0=OFF, 1=TX/RX)
050181 Send/read usage for ANT4
(0=OFF, 1=TX/RX, 2= RX)
050182 Send/read VOX delay (0=0.0 sec.
to 20=2.0 sec.)
050183 Send/read VOX voice delay
(0=OFF, 1=Short, 2=Mid.,
3=Long)
050184 Send/read NB depth (0=1 to 9=10)
050185 Send/read NB width
(0=0 to 255=255)
06 Send/read DATA mode with filter
set (see p. 14-10 for detail)
07 Send/read SSB transmit band-
width (0=WIDE, 1=MID, 2=NAR)
08 Send/read DSP filter shape
(0= Sharp, 1= Soft)
09 Send/read roofing filter set
(0=3 kHz, 1=6 kHz, 2=15 kHz)
0A Send/read manual notch width
(0=Wide, 1=Mid., 2=Nar.)
1B 00 Send/read repeater tone frequen-
cy (see p. 14-10 for details)
01 Set/read TSQL tone frequency
(see p. 14-10 for details)
1C 00 Send/read the transceiver’s condi-
tion (0=Rx; 1=Tx)
01 Send/read antenna tuner condi-
tion
(0=OFF, 1=ON, 2=Start tuning or
while tuning)
Command Sub command Description