Icom IC-7700 - Manual (Page 96)

5-8
D D Scope set mode (continued)
5
FUNCTIONS FOR RECEIVE
Set the scope edge frequencies for fixed mode scope
when the 30 to 45 MHz band is selected. • Set the frequencies within 30.000 to 45.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the difference
between higher and lower frequencies from 5 to
500 kHz automatically while setting another edge
frequency.
(30.00 – 45.00) 30.000 30.500 – MHz
Set the scope edge frequencies for fixed mode scope
when the 45 to 60 MHz band is selected. • Set the frequencies within 45.000 to 60.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the difference
between higher and lower frequencies from 5 to
500 kHz automatically while setting another edge
frequency.
(45.00 – 60.00) 50.000 50.500 – MHz
Set the scope edge frequencies for fixed mode scope
when the 26 to 30 MHz band is selected. • Set the frequencies within 26.000 to 30.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the difference
between higher and lower frequencies from 5 to
500 kHz automatically while setting another edge
frequency.
(26.00 – 30.00) 28.000 28.500 – MHz