Icom IC-7700 - Manual (Page 164)

12-11
12
SET MODE
Select “ON” when the external display is connected.
(default: OFF) • At least 800
×
600 pixel resolution is required for the dis-
play.
External Display OFF
Selects the suitable pulse level for the connected ex-
ternal display from H and L. (default: H)
External Display Sync Pulse H
Turns the opening message screen indication capa-
bility ON and OFF. (default: ON)
Opening Message ON
■
Display set mode (continued)
Turns the screen saver function ON (15, 30 or 60
minutes) and OFF.
(default: 60 min.)
The screen saver will activate when no operation is
performed for the selected time period to protect the
LCD from the “burn-in” effect.
Screen Saver Function 60min
Selects the screen saver type from “Bound,” “Rota-
tion” and “Twist.”
(default: Bound)
The screen saver indication can be displayed for your
reference while pushing and holding [F-5•PREVIEW].
Screen Saver Type Bound
Sets the introductory text, up to 10-character long,
displayed in the opening screen.
Usually, you set your call sign for the opening screen.
Capital letters, small letters, numerals, some symbols
(– / . @) and spaces can be used.
z Push [F-5•EDIT] to select the name edit condition.
• The cursor under the 1st character blinks.
x Push [ABC] (MF6) , [abc] (MF6) , [123] (MF7) or
[Symbol] (MF7) to select the character group, then
rotate the main dial to select the character.
• Push [ABC] (MF6) or [abc] (MF6) to toggle capital and
small letters.
• Push [123] (MF7) or [Symbol] (MF7) to toggle numerals
and symbols.
• Push [F-1• Ω ] or [F-2• ≈ ] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Pushing the transceiver’s keypad, [0]–[9], can also
enter numerals.
c Push to set the name. EXIT/SET
My Call