Icom IC-7700 - Manual (Page 146)

10-4
■
Antenna memory settings (continued)
D D Temporary memory
The antenna temporary memory memorizes the man-
ually selected antenna. The selected antenna will be
re-called even if frequency band has been changed.
q Select the antenna set screen.
w Push [F-4•TEMP-M] to turn the temporary memory
ON and OFF.
e Select the desired frequency band with a band key.
r Push [ANT] (MF1) to select the desired antenna.
• “
★
” appears when a different antenna from the original is
selected.
t Push [F-1•ANT MR] to re-call the original antenna.
• “ ★ ” disappears.
y Push to exit antenna set screen.
CAUTION!: Before transmitting with the manually
selected antenna, make sure the selected antenna
suits the operating frequency. Otherwise the trans-
ceiver may be damaged.
D D Antenna selection mode
The automatic antenna selection (antenna memory)
and the [ANT]
(MF1) switch function can be deactivated
if desired.
q Select the antenna set screen.
w Push [F-6•[ANT] SW] to select the antenna selec-
tion from Auto, OFF and Manual.
• Auto
: Use the antenna memory. Antenna selec-
tion with [ANT] switch is also available.
• OFF : Only the antenna connected to [ANT1]
can be used. [ANT] switch is deactivated.
• Manual: Deactivate the antenna memory function.
Antenna can be selected with [ANT]
switch operation only.
e Push to exit antenna set screen. EXIT/SET
EXIT/SET
Push to select the
antenna selection mode. F-6 [ANT] SW
“ ★ ” indicators appear when a different
antenna from the original is selected.
Push [F-4•TEMP-M] to turn the
temporary memory ON and OFF.
10
ANTENNA TUNER OPERATION