Sunway NT 2600 - Manual (Page 68)

TYCO SOLARLOK connectors
The TYCO SOLARLOK connectors
are only approved for connection to
permanently laid cables!
They must not be disconnected
under load!
The circuit must be interrupted at
a suitable point! The cables must be
provided with a suitable adhesive
label close to the TYCO SOLARLOK
connector!
The TYCO SOLARLOK connectors must
always be disconnected from other
voltage sources on all sides during
assembly, in order to protect against
electric shock.
144
!
Fig.: Manual crimping tool for assembly of
TYCO SOLARLOK connectors