Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 115)

85
C H A P T E R
8
Configuring the SAN
This chapter contains the following topics regarding how to configure your SAN
system. For more detailed information on managing multiple switches and
managing switch zones, see the SANbox 8/16 Switch Management User’s Manual.
■ “Managing Multiple Switches” on page 85
■ “Managing Switch Zones” on page 88
■ “Creating On-Demand Device Nodes on Hosts for Fabric Configurations” on
page 89
Managing Multiple Switches
For additional information, see the SANbox-8/16 Switch Management User’s Manual.
The SANsurfer Switch Manager only displays one switch in the Fabric window
display. You must perform several operations to manage multiple Fabrics (switches).
This section contains the following topics about multiple switches:
■ “To Save a Switch IP Configuration to Disk” on page 86
■ “To Save a Subsequent Switch IP Configuration to Disk” on page 86
■ “To Recall a Switch IP Configuration” on page 86
■ “To Delete a Switch Configuration” on page 87
■ “Managing Cascaded Switches” on page 87