Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 69)

Chapter 3 Installation Overview 39
PatchPro Expert
PatchPro Expert analyzes the system configuration and currently installed patches
with the latest patch revisions available on the
http://sunsolve.Sun.Com . If new
patch revisions are available on http://sunsolve.Sun.Com , it generates a list and
allows you to download the patches. It also generates a list to indicate the order in
which patches should be installed.
▼ To Download Patches Using PatchPro
Interactive
PatchPro Interactive does not verify that the selected configuration is a valid
configuration, nor does it interrogate your system to discover which patches may
already be installed. PatchPro presents to the user all the patches (in install order)
for the selected configuration. A
README.txt file with the install order is supplied
as part of the tar file.The patch installation order listed in the README.txt file may
not coincide with those listed in this book. Follow the installation order defined in
TABLE 6-2 .
1. For Sun StorEdge Network FC Switch-8 and Switch-16, Switch 3.0, go to
http://sunsolve.sun.com.
2. Select Patches from the menu on the left side of the page.
3. From the same menu, select PatchPro.
4. From the same menu, select Storage Products.
5. Select the PatchPro Interactive link on the main page.
6. Select the pieces of hardware/software for analysis:
a. From the SAN Product Bundle section, select Network FC Switch and version
3.0.
This will provide the driver and utility patches, Sun StorEdge Traffic Manager, the
switch firmware and the switch GUI patch necessary to use and install the 3.0
software.
b. From the software section, select the packages that you have installed or are
planning to install before loading the patches.
This selection provides you with patches to the packages, but it does not provide
the package itself. You must obtain each package separately, and install each one
on your host before you install the patches.
c. Select the disk arrays that you plan to connect to your SAN switch.