To set the network ip address using rarp – Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 User Manual

Page 88

Advertising
background image

58

Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001

You will need the following information to change the IP address:

IP address _______________________

Contact the person who maintains your
network for this information.

MAC address _____________________ See

FIGURE 5-1

and

FIGURE 5-2

for the location

of the MAC Address.

Switch name ______________________ This is the assigned name of the switch you

are installing.

FIGURE 5-1

Sun StorEdge Network FC Switch-8 MAC Address Location

FIGURE 5-2

Sun StorEdge network FC switch-16 MAC Address Location

To Set the Network IP Address Using RARP:

1. On a host connected to the same subnet as the switch, save your current

configuration.

2. Check that the

/etc/ethers

file exists.

# ls /etc/ethers

3. If you find the file, create the

/etc/ethers.SAV

backup file:

# cp -p /etc/ethers /etc/ethers.SAV

MAC Address

microsystems

MAC Address

Advertising