Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 40)

10 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
The Sun StorEdge T3 array and the Sun StorEdge T3+ array can be part of the same
SL zone or nameserver zone.
L180 and L700 FC Tape Libraries
Both the L180 and L700 FC Tape Libraries require STK 9840 FC tape drives.
You must upgrade to the most recent software for your L180 or L700 FC-Tape unit.
See the release documentation that came with your tape library for more
information.
FCIP (NFS/NAS and SNDR)
Switches
For high availability, configure any two sets of switches in parallel:
TABLE 2-4 Sun StorEdge A3500FC array
1
1. The Sun StorEdge A3500 FC array is not supported on hosts that have Sun StorEdge Traffic Manager enabled
or that have Fabric-connected host ports.
Feature Supported
Cascading No
Zone Type SL zone only
Maximum number of arrays per SL zone 4
Maximum initiators per SL zone 2
TABLE 2-5 FCIP (NFS/NAS and SNDR)
Supported
Cascading Fabric nameserver zone
Zone Type Fabric nameserver zone (HBA as F-Port
point-to-point)
Maximum device ports per zone 8
1,2
1. With the PCI dual Fibre Channel Network Adapter+ , only physical port 2 can be used for FCIP.
2. With the CPCI Dual Fibre Channel Network Adapter , only physical port 1 can be used for FCIP.