Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 80)

50 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
FIGURE 4-7 Installing the Vent Panel for a 16-Port Switch
Connecting the Cables
Some storage cabinets may have shorter and fewer power cords. In these cases, you
must use the Y cable, provided with your switch, to increase the number of power
connections and provide adequate power cord length. Install the Y cables only in the
J8 or J12 connections of the power sequencer.
“To Connect the Cables to a Sun StorEdge T3 Array” on page 51
“To Connect the Cables to a Sun StorEdge A5200 Array” on page 52
“To Connect the Cables to a Sun StorEdge A3500FC Array” on page 52
“To Connect the Cables to a Sun StorEdge L180 or L700 FC Tape Library” on page 56