To save a switch ip configuration to disk, To recall a switch ip configuration – Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 User Manual
Page 116
86
Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
▼
To Save a Switch IP Configuration to Disk
1. In the Fabric window, type the switch IP address in the IP Address field.
2. Click File and select Save As.
a. Type the Fabric name of the switch.
b. Click OK.
The Fabric is saved to disk.
▼
To Save a Subsequent Switch IP Configuration to
Disk
1. Click the gray Sun icon to highlight the Fabric fields.
2. Click Delete.
The current Fabric field line disappears.
3. Select the IP Address field and type the new switch IP address.
4. Click File and select Save As.
a. Type the Fabric name of the switch.
b. Click OK.
The new switch Fabric is saved to disk.
▼
To Recall a Switch IP Configuration
1. Click File.
2. Click Open Fabrics.
The Fabrics with a
.fab
extension are displayed.
3. Select the Fabric you want to recall, and then Click OK.
The new Selected Fabric has been added.