Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 70)

40 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
d. Under switches and HBAs, select the HBAs in your SAN.
You do not need to select the switches under this block because the switch GUI/
firmware was captured when you selected the Network FC Switch, Version 3.0.
7. When your selections are complete, select Generate Patch List.
An ordered list of the patches required for your selections displays. You can choose
which patches to download, or you can download them all in one tar file.
If the patch list contains any contract patches, provide your SunSolve User ID &
password.
▼ To Download Patches Using PatchPro Expert
PatchPro Expert analyzes the system configuration and currently installed patches
with the latest patch revisions available on
http://sunsolve.Sun.Com . If newer patch
revisions are available on http://sunsolve.Sun.Com , it generates a list and allows
you to download the patches. It also generates a list to indicate the order in which
patches should be installed. Follow the installation order outlined in
TABLE 6-2 .
1. Go to http://sunsolve.sun.com.
2. Select Patches from the menu on the left side of the page.
3. From the same menu select PatchPro.
4. From the same menu select Storage Products.
5. Select the PatchPro Expert link on the main page.
This analyzes the currently installed patches on the system and generates the list of
patches that need to be updated.
After you follow the instructions on the screen and select the hardware products
attached to your system, an ordered list of the patches required for your system
displays.
6. Download the patches.