Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 181)

Appendix B Error Messages 151
Topology Display Error Messages
TABLE B-8 Topology Display Messages
Error Message Corrective Action
Source IP switch cannot be deleted. SANsurfer does not allow the user to delete the switch
with the network connection; only the cascaded switch
may be deleted.
The GUI has detected a loss in Ethernet
connectivity to the sourceIP switch in the Fabric.
Check your Ethernet connections. Click OK to
return to FABRIC list window. Verify network connection
1
to Fabric.
Guest user not allowed to change the Fabric
configuration. Login as admin or superuser and retry.
Flash Download was unsuccessful. Either the flash file has been corrupted, or the network
connection is unreliable. Verify that the correct flash file
was selected, and verify the network connection
1 to the
Fabric, then retry.
Error encountered while saving the Fabric
configuration. Operation cancelled. Verify network connection 1 to Fabric and retry.
The device appears to be offline. Please verify it
is connected properly. Verify Fibre Channel links to switch and retry.
Your Fabric contains conflicting Name Server
zoning methods. You must select the zoning
methodology for this Fabric. The cascaded switches are configured with different
Nameserver zoning methods (Port-based or WWN-
based). From the Topology Display, select the Special-
>Select Zoning Method menu item to configure the
zoning method for the Fabric.
… appears to be no longer in the Fabric.
Configuration changes may have been lost. Verify network connection
1
to Fabric and Fibre Channel
links to switch, then retry.
The GUI has detected a loss in Ethernet
connectivity to the sourceIP switch in the Fabric.
Check your Ethernet connections. Click OK to
return to FABRIC list window. Verify network connection
1
to Fabric and retry.