Spectra Logic Spectra 12000 - Manual (Page 101)

Chapter 7. Configuring the Spectra 12000 E-QIP 101
Configuring NDMP Enabled by TAOS
You will need to assign a user name and password which will be used to
gain access to the backup resources--drives and/or libraries--under the
control of the TAOS NDMP agent.
This user name and password will have to be part of the NDMP backup
application set up. It will be the backup application that will need to
access the tape or library resource.
1. Select TAOS NDMP configuration to set the NDMP user name and
password.
Login username This is the user name that the NDMP backup application
will use to gain access to the library resource. The default setting is root.
If the Login username is not root, select [1] to edit.
Figure 7-36 The TAOS Configuration menu, select [5] to view the TAOS NDMP Configuration menu.