Adding drives – Spectra Logic Spectra 12000 User Manual
Page 144
144
Spectra 12000 User Guide
Adding Drives
The Spectra 12000 library readily accepts additional drives up to a
maximum of eight drives. Although robotic operations are disabled when
the front door is open, the library continues operation while you add or
remove a drive. No tools are required.
1.
In the Library Controller, select the General Toolbar.
2.
Tap Drives.
3.
Select the drive slot where you want to add the drive by tapping on
the bar for that drive.
4.
Tap Add.
5.
A Confirm Selection window pops up asking Okay to add drive? Tap
OK.
Note:
When you do this, the solenoid latches on the door
should open automatically.
6.
A window pops up with the message Open Door and Add Drive. Close
and latch door. Tap Ok when complete.
Figure 11-2 The Drive Configuration screen.