Spectra Logic Spectra 12000 - Manual (Page 62)

62 Spectra 12000 User Guide
Enabling Serverless Backup
1. From the General Status screen, tap Robotics. The System Setup
screen appears.
2. To enable Serverless Backup, you will need to obtain an activation
key from Spectra Logic. Contact Spectra Logic with the serial number
of the device, as displayed in the Serial # field, to obtain the
activation key.
3. Tap the blank field to the right of Submit Key.
4. A virtual keyboard appears. Enter the key.
5. Tap OK on the virtual keyboard.
6. Tap Submit Key.
Serverless Backup F-QIP Setup
To use Serverless Backup the F-QIP must be configured as an initiator/
target. To enable this mode you will need to uncheck the Disable
Initiator box in the Edit F-QIP Configuration menu on the Library
Controller.
Figure 6-6 The System Setup screen.