Spectra Logic Spectra 12000 - Manual (Page 148)

148 Spectra 12000 User Guide
Note: Do not set the drive switches manually unless one of
the preset drive switch settings doesn’t work with your
operating system.
If you need to set drive switches manually, call Spectra
Logic Technical Support at (800) 227-4637 for help.
17. Set the switches and tap OK to exit.
18. If your operating system is not included in the Drive Configuration
Presets window, you can use the Emulation option to change the
drive SCSI Inquiry identification from the default Sony SDX-500C or
SDX-700C. You can also add a drive emulation not on the list by
using the User Defined option in the Emulation window.
19. Tap OK here to save the emulation, dip switch, and SCSI ID settings to
the QIP and LCM board. The Library Controller will remember this
information when you come back to these screens.
20. Repeat Steps 2 through 10 for each drive. Emulation information
displays in the Drive Configuration screen for each drive you have
configured.