Eject media – Spectra Logic Spectra 12000 User Manual
Page 118
118
Spectra 12000 User Guide
5.
Tap Open/Close. A window pops up asking Open Entry/Exit Port? Tap
OK. This opens the E/E port.
6.
Insert the new media into any slot. Take note of the slot number.
7.
Tap Open/Close. A window pops up asking Close Entry/Exit Port? Tap
OK. This closes the E/E port.
8.
Select the slot in the E/E port that you noted in Step 6. Then select
the slot in which you wish to insert the new media.
9.
Tap Move.
Note:
To move all the tapes from the E/E port into the
current partition, tap Bulk Load. The Library Controller
will move all the tapes into the first empty slots it can find.
Eject Media
We recommend you use your backup software to eject media. If you are
using your backup software, and the partition you are ejecting media
from has both Enable Queued Unloads and Defer Queued Unloads checked,
you can eject media simply by tapping Eject Queued Tapes on the
Inventory screen.