Spectra Logic Spectra 12000 - Manual (Page 46)

46 Spectra 12000 User Guide
become available. This is different when Defer Queued Unloads is
checked.
Š When Defer Queued Unloads is checked, the library waits until you
have tapped the Eject Queued Tapes in the Inventory screen before
moving the cartridges you have ejected to the E/E port. Queued
ejects allow the library to share the E/E resource and also allow the
host software to eject more tapes than a single E/E pack holds.
7. Tap Save to save the changes you have made, or Cancel to exit without
saving any changes.
Now that the partition has been created, proceed to the appropriate
chapter for the controller (QIPs) you have assigned to the new partition.
Š To configure the Spectra 12000 S-QIP, go to Configuring the Spectra
12000 S-QIP on page 47. You will then need to configure any drives
assigned in Configuring the Drives on page 107.
Š To configure the Spectra 12000 F-QIP, go to Configuring the Spectra
12000 Library F-QIP on page 55. You will then need to configure
any drives assigned in Configuring the Drives on page 107.
Š To configure the Spectra 12000 E-QIP, go to Configuring the Spectra
12000 E-QIP on page 65. You will then need to configure any drives
assigned in Configuring the Drives on page 107.