Spectra Logic Spectra 12000 - Manual (Page 70)

70 Spectra 12000 User Guide
configuration settings, you should enable a password. To launch the
Password Configuration menu, select
1 .
[1] Set Password: Select to set or change the password. If changing the
password, you will be prompted to enter your password, then prompted
to enter it again. When a password is set, it will need to be entered to
make any subsequent configuration changes to the unit.
[2] Disable Password: Select to disable your password.
[?] Help: Displays help for this menu.
[Esc] Return to Main Menu: Returns you to the main menu.
Ethernet Configuration
By default the E-QIP is shipped with an IP address of 10.0.0.254 and a
hostname specific to the unit’s serial number. You will need to change
Figure 7-3 The Password Configuration menu.