Spectra Logic Spectra 12000 - Manual (Page 146)

146 Spectra 12000 User Guide
13. The Drive Configuration window automatically pops up.
The Drive Configuration screen displays the drive you added, as well
as any other drive on the same bus.
From the Drive Configuration screen, you can set emulation and SCSI
IDs.
Note: Setting SCSI IDs applies to S-QIPs and L-QIPs only.
F-QIP and E-QIP drive IDs are hard coded and cannot be
modified.
14. Tap +/- to select the SCSI ID.
Note: The drive’s SCSI ID must be unique from the QIP
bus, other drives on the QIP bus and any device on the
host bus it is attached to.
Figure 11-4 The Drive Configuration window.