Checking diagnostics, Updating firmware – Spectra Logic Spectra 12000 User Manual
Page 123
Chapter 9. Using the Spectra 12000 Library 123
Checking Diagnostics
Field service engineers use Diagnostics to identify the source of problems
with the library.
Updating Firmware
Note:
Although the library does not need to be idle to
perform firmware updates, the specific part of the library
receiving the firmware must be idle. For example, when
loading picker firmware, the picker must not be in use.
Updates to internal library software (i.e., firmware) are available from
Spectra Logic. To view the minimum recommended firmware levels, go
to: http://www.spectralogic.com/support/firmware_12k_64k.cfm.
To update:
1.
On the Library Controller, tap Toolbars, then tap Maintenance. The
Maintenance toolbar displays.
2.
Select Update F/W. The Firmware Update screen opens (Figure 9-9).
Figure 9-9 Firmware Update screen.