Spectra Logic Spectra 12000 - Manual (Page 152)

152 Spectra 12000 User Guide
7. Recalculate the length of the SCSI bus including the cables inside the
library and server computer. The maximum length specified in SCSI
Cable Requirements on page 159 includes cables inside the library.
Troubleshooting Fibre Channel Device Problems
To troubleshoot problems with a Fibre Channel device:
1. Check cable connections to devices.
2. If connecting through a third party device such as a hub or a switch,
check functionality on that device. Check link status and activity
lights.
3. Make sure the Fibre Channel host adapter card is firmly seated in the
card slot in your server computer.
4. Make sure the latest driver has been loaded from the Host Adapter
manufacturer’s site.
5. Follow guidelines in the Spectra Logic Server Setup Guide located on
the Spectra Logic Web site at: www.spectralogic.com.
6. Check if all devices attached to the loop are in our interoperability
matrix.
7. Make sure all cable connectors are firmly seated (and screwed in if
possible).