Spectra Logic Spectra 12000 - Manual (Page 110)

110 Spectra 12000 User Guide
The Drive Configuration screen displays the drive you selected, as well as
any other drive on the same bus. For example, if Drive 1 and Drive 2 are
on the same bus, the Drive Configuration screen displays them both if
you select either one.
From the Drive Configuration screen you can set emulation and SCSI IDs.
5. Tap +/- to select the SCSI ID.
Note: The drive’s SCSI ID must be unique from the QIP
bus, other drives on the QIP bus and any device on the
host bus it is attached to.
Step 6 through Step 11 are only necessary in special circumstances. Refer
to the Spectra Logic Server Setup Guide to see if you need to set drive
switch settings or drive emulation for your operating system.
6. Tap Presets to select drive switch settings and emulation for your
operating system (Figure 8-4). Select your operating system and tap
OK. If the selections do not include your operating system, tap Cancel.
7. If your operating system is not included in the Drive Configuration
Presets window, tap Switches in the Drive Configuration window. This
Figure 8-4 Drive Configuration Presets window.