To enable cod – Spectra Logic Spectra 12000 User Manual
Page 155
Advertising
Chapter 11. Maintaining the Spectra 12000 Library 155
To enable CoD
1.
From the General Status screen, tap Robotics. The System Setup
screen appears (Figure 11-9).
2.
To enable CoD, you will need to obtain an enablement key from
Spectra Logic. Contact Spectra Logic with the serial number of the
device, as displayed in the Serial # field, to obtain the activation key.
3.
Tap the blank field to the right of Submit Key.
4.
A virtual keyboard appears. Enter the key.
5.
Tap OK on the virtual keyboard.
6.
Tap Submit Key.
Figure 11-9 The System Setup screen.
Advertising