Power requirements, Spectra 12000 library – Spectra Logic Spectra 12000 User Manual
Page 164
164
Spectra 12000 User Guide
Power Requirements
Spectra 12000 Library
Power requirements for the Spectra 12000 library are listed in the table
below:
Power Cable
The power cable included with the Spectra 12000 library is a
standard, three conductor cord safe for 120 volt use in the United States
and Canada. The cable has a molded NEMA 5-15P male connector to
plug in the wall and a molded IEC60320 C13 female connector to plug in
the library.
Outlet
The outlet a customer must provide for the library is a NEMA 5-
15R (5=110VAC, 15=Circuit Rated Amperage, R=receptacle).
Note:
To use the library outside of the United States or
Canada, the power cord must meet the specifications for
that country.
Source
Requirements
Input Voltage
100-120 volts-AC at 6 Amps or 200-240 at 3 amps
Input Power
600 Watts maximum
Input Frequency
50/60 Hz