Spectra Logic Spectra 12000 - Manual (Page 86)

86 Spectra 12000 User Guide
10. Click on the square box next to the TAOS enabled device to check-
mark each TAOS enabled device you want installed (Figure 7-19).
11. Click on the + symbol to display all the devices located within the
TAOS enabled device and verify all devices are checked.
12. Press Install.
13. A dialog box displays, reading Installation Complete. Click OK.
14. Click Close to close the TAOS ITP Configuration window.
15. The Add/Remove Hardware Wizard displays. Click Next.
Note: An online text file displays with the Add/Remove
Hardware Wizard, walking you through the rest of the
hardware installation procedure. Use the online text file in
conjunction with the following instructions to install your
TAOS enabled hardware.
Figure 7-19 Device Discovery on the TAOS ITP
Configuration control panel, with the device selected.