Spectra Logic Spectra 12000 User Manual
Page 124
124
Spectra 12000 User Guide
3.
Select Local Directory in the File Locations section. This is where the
firmware files will come from.
4.
Tap Select Location. This will update the available updates list from
the local firmware directory.
5.
Select the component you want to update from the Components
section. The Current Firmware and Available Updates for that
component appear in Components detail section.
Note:
If the firmware file you want to update to is not in
the list, go to Accessing Firmware from a Remote Server on
page 125.
6.
Select the firmware version you want to update to from the Available
Updates list, by using the drop down menu.
7.
Tap Update Firmware. The component you selected will update to the
firmware version you selected. A window asks you to wait.
Caution:
Do not interrupt the library while firmware is
downloading. This takes less than 10 minutes.
8.
Repeat for every component to be updated. Only one unit can be
updated at a time.
Note:
When you update firmware, the new update file is
stored in the local file system. This allows you to upgrade
multiple times without downloading the file each time,
and keeps the file around in case it needs to be reapplied.
Use the Delete Files button to remove these files from the
file system to reclaim space.
If you Update the picker firmware you will need to reset
the picker parameters. Proceed to Reset Picker Parameters
on page 127.