Spectra Logic Spectra 12000 - Manual (Page 34)

34 Spectra 12000 User Guide
To attach the Fibre Channel cables:
1. Consult the documentation for your host operating systems and Fibre
Channel adapter cards for information on adding new devices. In
particular, look for details on creating and configuring device files or
drivers, and whether your system must be restarted before using new
devices.
2. Put in the QIP controller cards, if they are not already installed. For
more information on installing QIPs, refer to Adding QIPs on page
149.
3. Insert the GBICs into the GBIC ports on your library (and in your
host HBAs ir switch ports, if necessary).
4. Insert the Fibre Channel cables into the GBIC ports according to your
configuration and network diagram. Refer to Partitioning the Spectra
12000 Library on page 41.
Figure 2-2 Optical cable for
SC GBIC connector. Figure 2-3 Copper cable for
HSSDC GBIC connector.
Figure 2-4 SC GBIC
connector. Figure 2-5 HSSDC GBIC
connector.