LG General Wall Mounted-Inverter Type - Manual (Page 15)

Service Manual 15
Part 2 Functions & Controls
4.6 Sleep mode Auto control
• When the set sleep time is reached set time of [1,2,3,4,5,6,7hour] input by the remote control during the operation, the
operation of the appliance stops.
• When the appliance is on pause, the sleep timer mode cannot be input.
4.6.1 Sleep timer operation for cooling cycle
• While in cooling mode , 30 min. after the start of the sleep timer, the setting temperature increases by 1 C(2 .
After another 30minutes lapse, it increases again by 1°C(2 .
4.6.2 Sleep timer operation for heating cycle
• While in heating mode, 60 min. after the start of the sleep timer, the setting temperature decreases by 1 C(2 .
After another 60minutes lapse, it decreases again by 1°C(2 .
4.7 Auto restart
• When the power comes back after a sudden power failure during operation, the mode before the power failure is kept
on the memory of the appliance and it automatically operates in the saved mode on the memory.
• Operation mode that is kept on the memory
- State of operation ON/OFF
- Operation mode/setting temp./selected airflow speed
- Sleep timer mode/remaining time of sleep timer
- Chaos Swing
Setting temp. (˚C)
1.0˚C(2˚F) up
1.0˚C(2˚F) up
Cooling ON temp.
(Setting temp. +0.5˚C(+1˚F))
Cooling OFF temp.
(Setting temp. -0.5˚C(-1˚F))
0.5 1 Sleep time (hour)
Setting temp. (
°C)
Heating ON temp.
(Setting temp)
Heating OFF temp.
(Setting temp. +4.0
°C(+8°F))
1 2 Sleep time (hr)
1.0
°C(2°F) down
1.0 °C(2°F) down