Liebert 1000kVA - Manual (Page 55)

Operation
49
To change the Maximum Auto-Retransfer Attempts parameter, do the following at the SCC:
1. From the System Configuration Screen, press the Up or Down pad to highlight Maximum Auto-
Retransfer Attempts.
2. Press the Select pad. The screen above will appear.
3. Press the Up pad to increase the value or the Down pad to decrease it.
4. Press the Select pad to set the value and to return to the System Configuration screen.
System Current Rating
System current rating is determined by the part number, which is entered at the factory and cannot
be changed. Once it has been entered, the part number determines the value displayed for the System
Current Rating on the SCC system configuration screen (see Figure 29).
Language Selection
English and Portuguese are supported.
System Options
Figure 35 SCC system options screen
Figure 36 MMU system options screen
LCD Contrast
Backlight Brightness
Customer Alarm Interface Board................................NO
Continuous Duty Static Switch .................................YES
EXIT
UP: CURSOR UP
DOWN: CURSOR DOWN
SELECT: CHOOSE
SYSTEM OPTIONS
EXIT
SYSTEM OPTIONS
LCD Contrast
Backlight Brightness
Battery Temp. Compensated Charging...................... NO
Battery Test .............................................................. YES
UP: CURSOR UP
DOWN: CURSOR DOWN
SELECT: CHOOSE