Panasonic WJ-HD309 - Manual (Page 112)

112
● [Monitor 2] Switcher function of monitor 2
Perform the settings for the switcher function of monitor 2.
8 Live Sequence
The settings for "Live Sequence" are the same as for
"Monitor1". Refer to page 110 for further information.
8 Sequence Timing
The settings for "Sequence Timing" are the same as for
"Monitor1". Refer to page 111 for further information.
Notes:
• Select "EXT" when an external device that can transmit
a sequence signal is connected.
• The sequence changeover I/O (pin no.21) of the
ALARM/CONTROL connector on the rear panel will
supply signals when "INT" is selected and will receive
signals when "EXT" is selected.
8 Auto Skip
The settings for "Auto Skip" are the same as for "Monitor1".
Refer to page 111 for further information.
8 Login Screen
The settings for "Login Screen" are the same as for
"Monitor1". Refer to page 111 for further information.
Event Schedule
System Display Comm Switcher
SETUP MENU
LIVE
Maintenance Recording
Monitor 1
Monitor 2
■ Live Sequence
■ Sequence Timing
■ Auto Skip
■ Login Screen
SETUP
INT
OFF
CAM1