Panasonic WJ-HD309 - Manual (Page 148)

148
Search Operation
Item
Display search editing
area
Display Operation
Item
Switch display
Inquiry
Item
Additional disk space
inquiry
ID request
Interface ID request
Production category
request
Alarm information request
Software version inquiry
Status inquiry
Transmission command (ASCII)
Transmission command (ASCII)
QHR:p
QID
QIB
QIC
QLD:0
QRV
QSR
DIN:n
Response command (ASCII)
Response command (ASCII)
QHR:p:sss
QID:WJ-HD309
or
QID:WJ-HD316
QIB:WJ-HD309
or
QIB:WJ-HD316
QIC:2
QLD:n
QRV:n.nn
QSR:Status 1:Status 2...
n=0 (No alarm)
n=1 (Alarm end)
n=2 (Under alarm operation)
n.nn: Software version
Following response commands are sends back
for "Status 1:Status 2..."
msu:0 Under normal operation
msu:1 Under setting
oms:0001 Monitor 1
oms:0002 Monitor 2
ocs:ccccc ccccc: Camera number
otc:n Multiscreen segment display pattern
n=0: 4 segments
n=1: 7segments
n=2: 9 segments
n=3: 10 segments
n=4: 13 segments
n=5: 16 segments
oqt: 01F Sequence activated
ozm: 0 Zoom OFF
ozm: 2 x2 zoom
ozm: 4 x4 zoom
mad: 0 Alarm suspension OFF
mad: 1 Alarm suspension ON
zcd: Cascade activated
zqs: 1 CH recording activated:2 CH recording
activated...16 CH recording activated
Recording status nn=00 (Recording stop)
nn=01 (Manual recording activated)
nn=02 (Event recording activated)
nn=03 (Schedule recording activated)
nn=04 (Emergency recording activated)
DIN
Parameter (ASCII)
Parameter (ASCII)
p=1 HDD normal recording sector
p=2 HDD event recording sector
p=3 HDD copy sector
p=4 Disk connected to COPY 1
p=5 Disk connected to COPY 2
sss: Additional disk space (%)
n=+
Transmission command (ASCII)
ZTL:n
Response command (ASCII)
ZTL:n
Parameter (ASCII)
n=0 (Search editing area OFF)
n=1 (Recording event search list ON)
n=2 (Recording event search thumbnail ON)
n=3 (VMD search list ON)
n=4 (VMD Search Thumbnail OFF)
n=5 (Marking search list ON)
n=6 (Marking search thumbnail ON)
n=7 (Search playback display ON)