Panasonic WJ-HD309 - Manual (Page 46)

46
■ Alarm Function
● Blinks the ALARM indicator on the front
panel
● Switches from the images displayed on
monitor 1 and monitor 2 to the images from
the location of the alarm occurrence (on a
single screen)
● Displays the event information in the alarm
display area on monitor 1 and the camera
title display area on monitor 2
<Monitor 1>
<Monitor 2>
● Sounds the buzzer
Contact a system administrator about sounding duration.
● Announces an event occurrence to the con-
nected system device (Alarm Output)
Sends a signal to the device connected to the
ALARM/CONTROL connector, and the connected device
such as a buzzer will be activated.
● Starts recording automatically
Starts recording the image from the location of the event
occurrence automatically.
● Moves a camera to the preset position
A camera will move to the preset position registered in
advance.
● Announces an event occurrence by sending
e-mails
E-mails will be sent to addresses registered in advance.
Refer to the Network Operating Instructions (PDF) on the
provided CD-ROM.
ALARM
TIMER
HDD 2
ERROR
HDD 1
ALARM
SUSPEND ALARM
RESET
OPERATE
MONITOR1
MONITOR2
1
4
7
2
5
8
0
TEXT SEQ SHIFT
COPY DISK SELECT
EL-ZOOM