Panasonic WJ-HD309 - Manual (Page 159)

159
• Check if the HDD has any available disk space.
• Check if the recording setup is set to ON.
• Check the schedule settings.
• Check the recording priority settings.
• When the setting menu is displayed by a non-interlace
signal, the setting menu may be unable to function nor-
mally.
Since the setting menu of the matrix switcher is displayed
by a non-interlace signal, recording or displaying with this
unit may be impossible.
• Check if images have been recorded on the HDD.
• Check the connection of the camera you are going to con-
trol. Coaxial communication control is available for cam-
eras connected to VIDEO IN 1 to 8 for the WJ-HD316 (1
to 6 for the WJ-HD309).
• Check if the camera you are going to control is a combina-
tion camera.
• Check the camera control settings.
• Can the users control the cameras?
Check the level settings of the users logging in.
• Check the BUSY indicator. When the indicator is lighting,
a higher-priority user is controlling the cameras. You can-
not control the cameras until the indicator goes out.
• Can the users record images?
Check the level settings of the users logging in.
• Can the users display camera images on the monitors?
Check the level settings of the users logging in.
Check item/Remedy Problem Page
Cannot start recording.
Cannot record the SETUP
MENU of a matrix switcher
Cannot playback images.
Cannot control cameras.
Refer to p. 95.
Refer to p. 98.
Refer to p. 105.
Refer to p. 98.
–
Refer to p. 28.
Refer to p. 70.
Refer to p. 70.
Refer to p. 116.
Refer to p. 123
and 125.
Refer to p. 8.
Refer to p. 123
and 125.
Refer to p. 123
and 125.