Panasonic WJ-HD309 - Manual (Page 9)

9
q Audio Input Connectors (AUDIO IN 1 - 4)
These connectors, for RCA pin jacks, accept an unbal-
anced –10 dBV, 10 k
Ω line input audio signal supplied
from an external device such as a microphone amplifi-
er.
w Audio Output Connector (AUDIO OUT)
This connector, for an RCA standard jack, supplies an
unbalanced –10 dBV, 600
Ω line output audio signal to
an external device.
Recorded audio will be supplied from this connector
during playback.
e Video Input Connectors (CAMERA IN 1 - 16 for the
WJ-HD316/CAMERA IN 1 - 9 for the WJ-HD309)
Connect system cameras or combination cameras to
these BNC connectors.
A 75
Ω termination is made unless the video output ter-
minal is connected.
To connect combination cameras, connect them to the
CAMERA IN 1 - 8 connectors of the WJ-HD316, or the
CAMERA IN 1 - 6 of the WJ-HD309 (accept coaxial
communication).
r Video Output Connectors (CAMERA OUT 1 - 16 for
the WJ-HD316/CAMERA OUT 1 - 9 for the WJ-HD309)
These BNC connectors supply video signals looped
through the video input connectors.
Note: Video signals will not be supplied from the CAM-
ERA OUT 1 - 8 connectors (CAMERA OUT 1 - 6
connectors for the WJ-HD309) if the power of the
unit is off.
■ Rear View
[WJ-HD309]
[WJ-HD316]
IN
OUT
CASCADE OUT
3
2
1
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
1 2
VIDEO
AUDIO IN AUDIO OUT MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTOROL
SERIAL ALARM
POWER
COPY 1 MODE
EXT STORAGE 10/100BASE-T RS485(CAMERA) DATA
AC IN
SIGNAL GND 1
4 2
1 2
IN
OUT
CASCADE
OUT
16
16
3
15
15
14
14
13
2
1
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
VIDEO
AUDIO IN AUDIO OUT MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTOROL
SERIAL ALARM
POWER
COPY 1 MODE
EXT STORAGE 10/100BASE-T RS485(CAMERA) DATA
AC IN
SIGNAL GND 1
4 2
w t y u i
o !0 !1 !3 !5 !8
!2 !4 !6 !7 e
r !9
w t y u i
o !0 !1 !3 !5 !8
!2 !4 !6 !7 q e
r !9
q
t Monitor Output Connector (MONITOR OUT1, MONI-
TOR OUT2/CASCADE OUT)
Connect monitors to these BNC connectors.
The MONITOR OUT2 connector can also be used as
the CASCADE OUT connector.
When using two or more units of the WJ-HD316/WJ-
HD309 and using the MONITOR OUT2 connector as
the CASCADE OUT connector, connect with the CAS-
CADE IN connector of another WJ-HD316/WJ-HD309.
y Cascade In Connector (CASCADE IN)
Connect with the CASCADE OUT connector of another
WJ-HD316/WJ-HD309 when using two or more units of
the WJ-HD316/WJ-HD309.
u Serial Connector (SERIAL)
Connect a PC with this D-Sub 9-pin connector when
controlling this unit.
i Monitor Connector (MONITOR (VGA))
Connect a VGA monitor with this connector. The same
video signal supplied to the MONITOR OUT2 connector
will be supplied to this connector.
IMPORTANT
For European Customers
The refresh rate of the video output signal supplied from the
MONITOR (VGA) connector is 50 Hz. Some VGA monitors
in Europe may not support this refresh rate and could be
damaged. Please check the refresh rate supported by your
VGA monitor before connecting.