Press the play/pause button to start play- back, Press the stop button to stop playback – Panasonic WJ-HD309 User Manual

Page 35

Advertising

⁄2

Move the cursor to select a detection mode
using the arrow buttons and rotate the jog dial
to check the radio button next to the selected
detection mode. Press the SET button to deter-
mine the selection.

Refer to page 36 for further information about each of the
detection modes.

<ANY AREA mode>
Move the cursor to the parameter box using the arrows but-
ton (C) to select a masking duration from the following.
1 s/1 m/1 h/24 h

<VECTOR mode>
Move the cursor to an area for the settings of VECTOR
using the arrows button (C) and rotate the jog dial to select
an area. Move the cursor to the parameter box of the
selected area using the arrows button (B) to select an
interval time for an object moving between each area from
the following.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m

<DURATION>
Move the cursor to the parameter box of each area using
the arrows button (B) and rotate the jog dial to select a
moving duration for an object in each area from the follow-
ing.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m

⁄3

Press the SET button or the PLAY/PAUSE but-
ton to start searching and display the results
of the VMD search.

Up to 200 results will be displayed. (When 200 results are
listed, searching will stop.)

Notes:

• It may take some time until the search results are dis-

played.

• It is possible to stop searching by pressing the STOP

button.

⁄4

Rotate the jog dial to select a result to be dis-
played.

It is possible to turn the page by rotating the shuttle ring.

⁄5

Press the PLAY/PAUSE button to start play-
back.

The LISTED indicator and the indicator on the PLAY/PAUSE
button will light and playback of the selected recording will
start.
Note: It is possible to skip from the playback point to the

listed time (motion detected time) by rotating the jog
dial when the LISTED indicator is lit.
To return to normal playback, press the LISTED button.

⁄6

Press the STOP button to stop playback.

The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live images will be displayed on monitor 2 and the VGA
monitor.

LOGOUT

MONITOR1

MONITOR2

10/0

SHIFT

SEQ

COPY

DISK SELECT

EL-ZOOM

TEXT

LOGOUT

OSD

MARK

BUSY

316

REV

FWD

STOP

PLAY

PAUSE

REC - REC STOP

SETUP

/ESC

PAN/TILT

SLOW

A-B

REPEAT

GOTO

LAST

LISTED

ZOOM/
FOCUS

IRIS

PRESET

/AUTO

SET

–

⁄6 ⁄3⁄5

⁄2

⁄2⁄3 ⁄2⁄4

PAN/

TILT

VECTOR

ANY AREA

MASKING DURATION

SET : [SET] SEARCH : [PLAY] CANCEL : [ESC]

20s

■ VMD SEARCH

DURATION

24h

TIME&DATE

01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch

CAM

25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM
25.APR.03*12:34:56 AM

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

VMD SEARCH

TOTAL

25.APR.03*12:34:56 AM 25.APR.03*12:34:56 AM

12345