Panasonic WJ-HD309 - Manual (Page 90)

90
SETUP
To operate this unit, it is necessary to set each item of the SETUP MENU in advance.
Perform the settings for each item of the SETUP MENU by displaying the SETUP MENU on monitor 2.
Settings items are as below.
■ Item list of the SETUP MENU
Maintenance
REC Rate Display the recording rate for each recording mode and image quality for each
camera channel in list form.
Disk Info Display hard disk information such as the available disk space on the built-in hard
disk and the connected optional extension unit.
Version Info Display version information of the software and the hardware and the MAC
address.
Disk End Mode Set actions to be taken when the available space of the built-in hard disk or of the
connected external recording device reaches a specified level.
Disk Capacity Set to display a warning when the available space of the built-in hard disk or of the
connected external recording device reaches a specified level.
Data Delete Delete data stored on the hard disk, or format (initialize) the DVD-RAM disk con-
nected to the COPY port.
Event Log Display the event log. Refer to page 44 for further information.
Error Log Display the error log such as a HDD error log.
Access Log Display the time, user name and IP addresses when logging in/out to/from this
unit.
Recording
REC Setup Perform the basic settings for recording.
Emergency REC Perform the settings for emergency recording such as recording time and record-
ing rate.
Event
Event Setup Perform the settings for the alarm output duration and the buzzer sound when an
event (motion detection, video loss, command/terminal alarm) occurs.
VMD Setup Perform the settings for the motion detection area, sensitivity and the detection
mode for each camera channel.
Alarm Setup Perform the settings for the alarm display duration and alarm suspension duration.
Terminal Setup Specify the alarm terminal polarity.
Schedule
Time Table Create timetables for each day of the week, and assign the recording action pro-
grams and event action programs to the created timetables.
REC Program Up to 4 recording programs can be created. Perform the settings for the recording
actions for each program such as image quality and recording rate for each cam-
era channel.
Event Program Up to 4 event programs can be created. Perform the settings for each program
such as the event action and the auto copy function for each event type.
Special Days Assign timetables independently for special days aside from other days.
Settings menu Description Page
94
94
94
95
95
95
96
96
97
98
99
100
100
103
104
108
105
107
109