Panasonic WJ-HD309 - Manual (Page 7)

7
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■ Front View
S-VIDEO
COPY 2 VIDEO
OUT
AUDIO OUT
S-VIDEO
COPY 2 VIDEO OUT
AUDIO OUT
[WJ-HD309]
[WJ-HD316]
ALARM
TIMER
HDD 2
ERROR
HDD 1
ALARM
SUSPEND ALARM
RESET
OPERATE
MONITOR1
MONITOR2
1
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
PAN/ TILT
STOP PLAY PAUSE REC - REC STOP
ZOOM/
FOCUS
TEXT COPY DISK SELECT
EL-ZOOM
MARK
LOGOUT
IRIS
PRESET
/AUTO
A-B REPEAT
GOTO LAST
LISTED
SEARCH
BUSY
SETUP
/ESC
SET
REV
– +
FWD
PULL
Digital Disk Recorder
WJ-HD
PAN/TILT SLOW
LOGOUT
ALARM
TIMER
HDD 2
ERROR
HDD 1
ALARM
SUSPEND ALARM
RESET
OPERATE
MONITOR1 MONITOR2
1
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSD
ZOOM/
FOCUS
COPY DISK SELECT
EL-ZOOM
MARK
IRIS
PRESET
/AUTO
A-B
REPEAT
GOTO
LAST
LISTED
SEARCH
BUSY
SETUP /ESC
SET
REV
– +
FWD
PULL
Digital Disk Recorder
WJ-HD
STOP PLAY PAUSE REC - REC STOP
PAN/TILT
SLOW
PAN/
TILT
qw e r
t
yu i
o !8 !9 @0
!0 !1
!3 !4 @1 @2 @3 @4 @5 #0 !2
!5 !6 !7 @6 @7 @8 @9
qw e r
t
yu i
o !8 !9 @0
!0 !1
!3 !4 @1 @2 @3 @4 @5 #0 !2
!5 !6 !7 @6 @7 @8 @9
q Operate Indicator (OPERATE)
Lights up when the power is turned on.
w Alarm Suspension Indicator (ALARM SUSPEND)
Lights up when the alarm suspension mode is selected.
e Alarm Indicator (ALARM)
Blinks when an alarm occurs, and lights steadily when
the activated alarm is reset automatically.
To turn this indicator off, press the ALARM RESET but-
ton.
r Alarm Reset Button (ALARM RESET)
Pressing this button cancels alarm activation, and
returns the system to the condition before the alarm
was activated.
t Error indicator (ERROR)
Blinks orange when an error occurs that will not keep
the unit from running.
Blinks red when an error occurs that may cause the
system to go down.
Refer to page 56 for further information about error/
warnings.
y Timer Indicator (TIMER)
Lights up when the schedule recording is set, and
blinks while the schedule recording is being performed.
u HDD Access Indicators (HDD1/HDD2)
Blinks when the HDD1 or the HDD2 is accessed
respectively.
i Monitor Switch button (MONITOR1/MONITOR2)
Pressing this button switches the monitor. This button
lights up when monitor 1 is selected, and goes off when
monitor 2 or the VGA monitor is selected.
o Shift Button (SHIFT)
Toggles the functions of the camera selection buttons.
!0 Camera Selection Buttons ([1] - [10/0], [11] - [16] for
the WJ-HD316, [1] - [9], [0] for the WJ-HD309)
Pressing a button displays live or playback images of
the selected camera. The LED in the button indicates
the status as follows.
Green: When a button is lit green, the currently dis-
played image on the monitor is live from the respec-
tive camera.
Orange: When a button is lit orange, the image from the
respective camera is recorded.
Blue: When a button is lit blue, the currently displayed
image on the monitor is live from the respective
camera and is also recorded.