Panasonic WJ-HD309 - Manual (Page 127)

127
For operating the camera connected to this unit, it is necessary to set the camera functions in advance.
Setup of the camera functions can be performed on the setup menu of the connected camera.
You can operate the camera setup menu by calling up it from this unit. Contents of the camera setting menu and operations
vary according to the connected cameras. For further information, refer to the operating instructions of the camera.
The following are the descriptions of how to display the camera setting menu.
z Press the camera selection button for a desired camera channel and the SET button simultaneously.
→The camera setup menu will be displayed.
Use the following buttons on the front panel to perform the settings of the camera setup menu.
x Press any one of the PAN/TILT button, the ZOOM/FOCUS button, the IRIS button, the PRESET/AUTO button and the cam-
era selection buttons 4 - 16 for the WJ-HD316 (4 - 9 for the WJ-HD309) to complete the camera setting.
Note: To display the special menu of the camera setup menu, press the camera selection button 2 after moving the cursor
to SPECIAL on the camera setup menu.
To reset the settings of the camera setup menu to the default settings, press the camera selection button 3 after mov-
ing the cursor to CAMERA RESET on the special menu.
Depending on the models of the connected cameras, the operation method and menu items are different. Refer to the
operating instructions of the connected camera.
DISPLAY SETUP MENU OF CAMERA
To move the cursor Arrows button (C D)
Arrows button (A B)
SET button
SETUP/ESC button
To change the selected parameter
To determine the selected parameter
To display the submenu
To return to the previous menu