Panasonic WJ-HD309 - Manual (Page 131)

131
160 GB: Indicates the hard disk capacity (disk existed
when last started up)
160 GB M: Indicates the hard disk capacity (mirrored disk
existed when last started up)
ADD (160 GB): Indicates that this hard disk is newly mount-
ed at this startup, but that it was not mounted last time.
Those parenthesized numbers indicate the capacity of
the hard disk.
ADD (ERROR): Indicates that this hard disk is newly
mounted at this startup, but that it was not mounted last
time. Then, an error is detected on the hard disk.
* (160 GB): Indicates that a different hard disk from the one
that existed at the last startup is mounted. Those paren-
thesized numbers indicate the capacity of the hard
disk.
* (ERROR): Indicates that a different hard disk from the one
that existed at the last startup is mounted, and an error
has been detected on the hard disk.
LOST: Indicates that a position where a hard disk was
mounted at the last startup has no hard disk.
–: Indicates that a hard disk is not mounted this time nor
was it at the last startup.
■ Display of the HDD DISK MENU
Information of the hard disk drive of the unit or the optional extension unit will be displayed on the "HDD DISK MENU".
Digital Disk Recorder
WJ-HD300
HDD DISK MENU
TOP MENU
FORMAT MIRROR ON REMOVE RESTART EXIT MIRROR OFF
Information of recording areas : [SETUP/ESC] OK : [SET]
160GB M
160GB
160GB
160GB
*(160GB)
ADD (160GB)
160GB
LOST
MAIN
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
EXT7
160GB M
160GB
160GB
160GB
*(ERROR)
ADD (ERROR)
160GB
-
160GB
160GB
160GB
160GB
160GB
160GB
-
160GB
160GB
160GB
160GB
160GB
160GB
-
1 2 3 4
Main unit/optional extension unit
Information about hard disk located in the main unit and optional exten-
sion unit
ERROR: Indicates that the hard disk has failed to be initial-
ized.
Important:
• It is impossible to operate the unit when there is a hard
disk with indications of * (capacity), * (ERROR), LOST
or ERROR. In this case, remove the relevant hard disk.
(Refer to page 139.)
• Hard disks with ADD (capacity) indication are not initial-
ized yet.
First, initialize them. It is impossible to record images on
it or to use it as a copy destination without initialization.
Note: The displayed available disk space on this menu will
not include the space required for data management.
Therefore, the understated available disk space will be
displayed.
It is possible to display information about the recording
area (allocated disk size for normal recording area,
event recording area and copy area) by pressing the
SETUP/ESC button while displaying the "TOP MENU" of
the "HDD DISK MENU".
■ About the HDD DISK MENU
The operations regarding the hard disk can be performed by displaying the "HDD DISK MENU" on monitor 2.
The "HDD DISK MENU" will be displayed when the SET button is pressed while displaying the system check complete window.
The "HDD DISK MENU" will also be displayed automatically after replacing or removing the hard disk.
The following operations can be performed on the "HDD DISK MENU".
Setting item
FORMAT
MIRROR ON
Description
Formats (initializes) the hard disk. It can also change the setting values for
the recording area respectively. Mirroring can also be started on this menu.
Recovers the mirrored hard disk.
Page
133
138
MIRROR OFF
REMOVE
RESTART
Cancels mirroring.
Removes the hard disk drive from the system logically.
Restarts this unit.
138
139
–
EXIT Closes the "HDD DISK MENU". –