Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 107)

[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
Comm. Method
Key Press Sound
Buzzer Sound Host Link
OFF
Putting-Out Time
Resume Function
OFF
None
ON
[ MEMORY SWITCH MENU (1/2) ]
Support Tool Mode NT600S
EXIT
SAVE
EXIT
NEXT
PAGE

2
    
Section 3-8
4-8 Various System Settings
The NT600S can set a variety of functions to the memory switches which are con-
venient during the operation. This section describes the memory switch settings
related to the operation environment.
4-8-1 Setting the Key Press Sound
Whether or not the key press sound is given when the NT600S touch switch is
pressed can be set with the memory switch.
The factory setting has been set to give the key press sound when the touch key is
pressed.
Set the key press sound by the menu operation from the System Menu as men-
tioned below.
Select “Maintenance Mode”.
Select “Memory Switches”.
Each time the “Key Press
Sound” touch switch is pressed,
the setting option “ON” alter-
nates with “OFF”.