Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 123)

[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
[ PT SETTING STATUS ]
Communication Method Host Link
PT Control Area DM0010
PT Notification Area DM0020
Automatic Reset OFF
Resume Function OFF
Host Link Speed 19200bps
EXIT EXIT
[ PT SETTING STATUS ]
Communication Method NT Link
PT Control Area DM0010
PT Notification Area DM0020
Automatic Reset OFF
Resume Function OFF
[ PT SETTING STATUS ]
Communication Method NT Link (1:N)
PT Control Area DM0010
PT Notification Area DM0020
Automatic Reset OFF
Resume Function OFF
PT UNIT No. 7
EXIT
[ PT SETTING STATUS ]
Communication Method C200H
PT Control Area DM0010
PT Notification Area DM0020
Automatic Reset OFF
Resume Function OFF
UNIT No. 9
EXIT
[ PT SETTING STATUS ]
Communication Method RS-232C
Automatic Reset ON
Resume Function ON
Data Bit Length 7 bits
Stop Bit Length 1 bit
Parity Bit Even
FlowControl XON/XOFF
RS-232CSpeed 2400bps
EXIT

  .  
Section 3-9
Select “PT Setting Status”.
<Host link> <NT link (1:1)>
<NT link (1:N)>
* If no unit is set at the PC, “0” will be displayed.
<C200H direct communication> <RS-232C>
* If no unit is set at the PC, “0” will be displayed.

The current NT600S setting status will be displayed.

Pressing the [EXIT] touch switch will exit the “PT Setting Status 1” display and
cause the NT600S to return to the “Maintenance Menu”.