Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 143)


.
  
Section 4-4

Enlarged display of the characters and marks
The characters and marks can be enlarged to the following scales.
Double width scale, Double height scale, x4 scale, x9 scale, x16 scale, x64 scale
 Smoothing
The characters and marks enlarged to the x4 scale or larger are displayed with
the outline automatically smoothed. This function is called “smoothing”.
 Reverse and flashing display
Reverse display: The display brightness of the character and the
background is reversed comparing with the
normal display.
Flashing display: Characters are displayed as they flash. The
normal display alternates with no-display.
Reverse and flashing display: The reverse display alternates with the normal
display.
5-4-2 Numeral Memory Table
The numeral memory table is an NT600S internal memory used to store the nu-
meral data. Up to 512 numeral memory tables can be used, and up to eight digits
(four bytes) of numeral data (including signs) can be stored in one numeral
memory table. The numeral memory tables at up to 50 positions can be registered
in one screen.
Displaying a Numeral The numeral memory tables are registered with table numbers 0 to 511.
When creating the screen data by using the support tool, set the position on the
screen to display a numeral and also set a numeral number to be displayed.
When the NT600S is operated, the screen displays the contents of the numeral
memory table.
Also, by relating the numeral memory tables with the bar graphs, the bar graphs
corresponding to the data of the numeral memory tables can be displayed.