Quantum Data 881 - Manual (Page 108)

90 Chapter 3 Administrative Tasks
8. Choose the Edit Factors item by pressing the adjacent soft key. The following items
appear on the generator’s display:
a. Edit the RATC factor by pressing the soft keys adjacent to the bottom row until the
cursor appears on the digit you want to change. Press the + or - keys to adjust the
setting up or down.
b. Press the Enter (Options) key to save the new setting.
Alternatively, to enter the result using the command line interface, use the RATC
command. For example:
RATC 1.0000442194553987
Cal Factors
Frequency ->
RATC
<- 1.000000000