Quantum Data 881 - Manual (Page 598)

580 Chapter 17 Testing Lipsync
emulating an EDID on the analyzer. In the EDID Editor, the Vendor Specific Block
screen with the
Video Latency and Audio Latency fields is shown below:
3. Press the Interface key repeatedly until the following menu appears:
4. Choose the connector to which the source device is connected by pressing the
adjacent soft key.
5. Connect an HDMI-to-HDMI cable between the HDMI IN connector on the analyzer and
HDMI Port on the source device. The EDID is read from emulated display on the
analyzer, and lipsync latency values are processed by the source device.
6. From source device, generate supplied lipsync test image.
7. On the generator, press the Tools key. The Tools menu appears on the generator’s
display as shown below.
HDMI IN 1
HDMI IN 2 *
System
Sequence
Probe
AFC
Analyzer
Reports
ImgShift